Techniques for Opening Tight Flowers

Techniques for Opening Tight Flowers

We've all been there; a shipment arrives, and those gorgeous blooms are shut tighter than a clam. Frustrating, right? We are here to help you coax those stubborn petals open. No more stressing over tight flowers eating into your prep time or disappointing customers with less-than-spectacular arrangements.

Before we dive into our toolkit of techniques, let's talk strategy. The key to stunning, perfectly-opened blooms for your events? It's all about timing and communication. Partnering with your sales reps well in advance can make all the difference. With proper planning, we can ensure your flowers arrive at the peak of perfection, saving you time and hassle. But for those times when you need to work a little flower magic, we've got you covered with a range of solutions to suit any situation.

Imagine the flowers have arrived, but when you open the box, they are too tight, and the wedding is in 3 days. What do you do????

tips for opening up tight wholesale flowers

Water Magic: The Secret to Perking Up Your Blooms

This should always be at the same temperature as the flowers. Under optimum conditions, you would have cold water with cold flowers that were maintained in the cold chain. Because the flowers need to be opened as fast as possible, they need to be warm, say 72-75°F and the water should be around the same temperature.

Follow these steps:

  • Cut the flower stems at a 45-degree angle under running water or while submerged to prevent air bubbles from entering the stem. Cut within a couple of inches of your final desired length, as this shortens the distance the water must rise to get to the bloom and facilitate the opening of the inflorescence.
  • Make your processing solution. When processing your flowers, add one (1) drop of dish detergent for every two gallons of water to create what's called a surfactant. The soap lowers the water's surface tension, allowing it to easily enter the vascular system of the flower. The recommendation of one drop per two gallons is a very dilute solution. This is important because too much detergent could harm the flowers. The goal is to have just enough to affect the water's properties without introducing harmful chemicals to the plant. While this technique is widely used, it's important to note that some flowers may be sensitive to detergents. Always use a mild, unscented dish soap and observe the flowers for any adverse reactions.
  • Fill your container as deep as possible.
    1. If you do not need the foliage, the water level should be close to the neck of the flower. Water moves up the flower stems through a combination of capillary action and transpiration pull. This process allows the flowers to draw up water efficiently, helping to hydrate the blooms and potentially encouraging them to open. From the water level to the flower, there would only be an inch or two, so the process of the bloom becoming turgid would be faster. At that point, the opening of the bloom should start.
    2. If you do need the foliage, then you will have to elect a compromise between the water being as deep as possible and keeping the foliage from becoming damaged from being waterlogged. The foliage being submerged in water for a short time is okay, however prolonged exposure can cause bacteria to grow, so be extremely mindful of this.
  • Make sure to closely monitor the flowers' progress and water quality, especially if using the deep-water method. You are watching for:
    1. The rate at which petals are unfurling and the evenness of opening across all blooms.
    2. The stem uptake of water and signs that stems are absorbing effectively.
    3. If you notice any wilting or drooping, that could indicate poor water uptake. If you do notice this, re-cut the stems, removing 1-2 inches from the bottom of the stem at a 45-degree angle using clean, sharp shears. Replace the water with fresh, clean water at the correct temperature. Increase humidity by placing a clear plastic bag over them to create a humidity tent. Remove any damaged or decaying parts of the stem or flower by removing any damaged leaves or petals. After implementing these steps, give the flowers a few hours to recover and continue monitoring closely.
Roses in water opening tight buds

Harnessing the Power of Sunlight: A Secret Weapon for Opening Flowers

Light is the most overlooked ally in a florist's arsenal when coaxing tight blooms open. But here's the catch - we're talking about the full power of natural sunlight, not your average desk lamp or overhead fluorescent. Electric lights won't cut it for this floral magic trick.

If you live in a cooler climate where outdoor temperatures hover below 70°F, you're in luck. You can place your stubborn blooms directly in the sun without much worry. However, if you live in a warmer area, seek out a spot with some overhead protection. A porch, a north-facing wall, or any reliable shaded area will do the trick.

Now, here's where it gets interesting. Morning or late afternoon sun tends to be your best bet - it's gentler and less likely to cause damage to the blooms, than the harsh midday rays. If you're dealing with particularly delicate blooms, bright indirect light can work wonders, too. Remember, different flowers have different sun tolerances, so what works for a hardy rose might be too much for a delicate orchid. When using this sun-soaking technique, vigilance is key. Check on your flowers every hour or so. Look for any signs of burning or wilting.

To ensure even exposure, give your flowers a gentle rotation now and then. And don't forget about hydration - flowers basking in the sun may need more frequent watering or misting to stay perky. One often overlooked benefit of this outdoor method is the natural humidity. Outdoor air tends to carry more moisture than our climate-controlled indoor spaces, giving your flowers an extra helping hand in the opening process.

If you're moving your flowers from indoors to out, be mindful of temperature shock. A gradual transition can help prevent stress on your blooms. And on breezy days, consider providing some shelter to protect delicate petals from wind damage.

For those of you in less sunny locales, don't despair! While natural sunlight is ideal, grow lights or specialized floral lights can be a good alternative. Just remember, a few hours of light exposure per day is usually sufficient - we're encouraging our flowers to open, not preparing them for a sunbathing competition!

Opening tight buds using sunlight

Turning Up the Heat: The Bloom-Boosting Power of Warmth

We all know that cool temps (think 34-38°F) are great for keeping flowers fresh long-term. But when we need those tight buds to burst open pronto? It's time to turn up the heat! Heat is like nature's alarm clock for flowers. It tells them, "Hey, it's time to wake up and show off!" To propel flowers towards *senescence, then elevated temperatures. Senescence is part of the life cycle, albeit the final stage. But remember, we're not trying to cook our blooms here. Keep it under 95°F and avoid direct sunlight at high temps. Think of it as a gentle nudge, not a shove!

Add some humidity to the mix. You can create a mini greenhouse by leaving flowers in their plastic sleeves or making a tent with a plastic drop cloth. Here's the science-y bit (don't worry—it's cool!): Flowers open when they're happily sipping water up their stems and releasing it through their petals.

More Open Petals = More Water Release = Faster Opening

So, the dream team for quick-opening flowers is warm, humid air, plenty of daylight, and a deep bucket of water.

If you're really in a pinch and those buds are being super stubborn, there's a wild card move. We call it "stress opening." If the flowers are extremely tight and you are concerned that they may not open, and you are out of all other options, then you can employ the tactic of last resort. Basically, you're giving the flower a mini existential crisis. No water, just warmth and light.

The reason stress opening works so rapidly is that all plants are endowed with the primary objective of making seeds to reproduce. It is the prime directive of all life on earth. The flower can sense that death is imminent and will start drawing the extant water in the stem up the vascular system to force the flowers to open. Forcing the fertilization process for the next generation of seeds.

This process is best done with a plastic sleeve on or in conditions of high humidity. It is recommended that, once you see the petals reflexing, you wrap the flower stems in a damp paper towel and place them in a cool spot for about an hour to stabilize. Then you would process the flowers again as outlined above. There will be some shrink, but something is better than nothing.

In a perfect world, we'd let our flowers open at their own chill pace in cool conditions. They'll last longer and look prettier that way. But sometimes we need to make the magic happen faster. Just remember, these are emergency measures for when you're in a bloom bind and we really don't recommend putting your flowers through this process. Our recommendation is to work with your sales rep to plan your orders ahead of time.


Here is a quick tip for some commonly tight flowers that can also help the opening process:

  • Roses: Gently blow into the center of the bud. The carbon dioxide can stimulate opening.
  • Peonies: Gently massage the bud with your fingers to loosen the petals.
  • Tulips: Add a pinch of sugar to the water to provide extra energy.
  • Lilies: Remove the pollen-covered anthers to redirect energy to petal opening.
  • Carnations: Submerge the entire flower in warm water for a few minutes.
  • Chrysanthemums: Mist the flower heads with room temperature water.
  • Gerbera daisies: Cut stem ends at a 45-degree angle every few days to improve water uptake.
  • Sunflowers: Add a drop of bleach to the water to prevent bacterial growth.
  • Dahlias: Recut stems underwater to prevent air bubbles from blocking water absorption.
  • Ranunculus: Gently fan out the outer petals with your fingers.

*Surfactants: A surfactant (surface active agent) is a substance that reduces the surface tension of a liquid, allowing it to spread more easily. In this case, dish detergent acts as the surfactant. By reducing water's surface tension, the surfactant helps water enter the tiny vascular system (xylem) of the flower stem more easily. By reducing water's surface tension, the surfactant helps water enter the tiny vascular system (xylem) of the flower stem more easily. This can improve water uptake, potentially leading to better hydration of the flower.

*Senescence: This term refers to the process of aging in living organisms. In plants and flowers, it's the natural deterioration and death of cells and tissues. This means that the aging and eventual death of the flower (senescence) is a normal and unavoidable part of its life. It's particularly relevant when discussing techniques to open flowers quickly, as these methods can sometimes accelerate the aging process. Understanding senescence is crucial for florists and flower enthusiasts because:

  1. It helps in predicting and managing the lifespan of cut flowers.
  2. It explains why certain treatments (like heat) can cause flowers to open quickly but may shorten their overall vase life.
  3. It underscores the importance of proper care techniques to delay senescence and extend the beauty and freshness of flowers.

Back to Blog